How To Change Service Account Password In Windows Server 2012

Home » SysAdmin » How to Change or Reset Administrator Countersign on Windows Server

Introduction

In that location may come a fourth dimension when you need to change the admin password on your Windows Server. Your recovery options depend on whether you lot remember the old password or not.

If you are routinely changing a known administrator password, you can use the Windows user interface. However, when changing an unknown ambassador password, you need to use the command prompt.

Irresolute Server Administrator Password Windows Server

If you lot already know the electric current ambassador password, log into your Windows Server, and but change the password. The steps on how to practice then differ depending on the version of Windows you are running.

How to Alter the Password on Windows Server 2008 R2/2012

The steps outlined beneath apply to Windows server versions 2008 R2 and 2012. The only deviation between them are steps 2 and iii.

1. Log into the server either directly or by using Remote Desktop.
2. Windows server 2008 R2: Right-clickComputer and so selectManage.
   Windows server 2012: Press the Windows primal, type Authoritative Tools and open up the app.
3. Windows server 2008 R2: SelectConfiguration.
   Windows server 2012: Navigate to Computer Management.
4. ClickLocal Users and Groups >Users.
5. Find and right-click theAdministratoruser.
6. ClickSet up Password> Keep.
7. Type in and confirm the new password.

How to Change the Password on Windows Server 2016 or 2019

If you are running Windows server 2016 or 2019, change the admin password by post-obit the steps below:

1. Log into the server either directly or past using Remote Desktop.
2. Press the Windows central + i to open Windows Settings.
3. Navigate to Accounts and open up the Sign-in Options.
4. Gyre to the Password section and click Change.
5. Provide the electric current password and click Adjacent.
6. Type in and confirm the new password.

How to Reset Password on Windows Server

What happens when you lot need to change the admin password because you have lost the old password?

If you lot don't have the old password, y'all tin can't access the server to alter it. Instead, use the command prompt to reset your administrator countersign. The following steps can exist used on Windows version 2008 R2, 2012, 2016, and 2019.

1. Insert a DVD or USB with the installation and boot the system.
2. On the Language and other preferences screen, clickAdjacent.
3. Select theRepair your reckonerlink.

4. The next steps differs according to your Windows version.
   Windows server 2008: Select your Bone installation and clickNext.
   Windows server 2012/2016/2019: Select Troubleshoot.

4. Click Control Prompt.
5. Type in the post-obit:

                Motion C:WindowsSystem32Utilman.exe C:WindowsSystem32Utilman2.exe              

The control in a higher place makes a backup of the utility manager.

                Copy C:WindowsSystem32cmd.exe C:WindowsSystem32Utilman.exe              

This command replaces Utilman with the Command Prompt. That is necessary to reset the countersign.

The commands mentioned above may vary based on the path of your Windows install. In our instance, information technology is on the C bulldoze. In example your install is located on another disk partition, modify the command accordingly.

7. Reboot the system.
8. Select the Ease of Admission icon.
9. Type in the following:

                net user administrator *              

10. Type in and confirm your desired password.

Once completed, you volition be able to log in as admin. However, don't forget to revert your changes to Utilman. To do so,

1. Reboot the computer again from the installation deejay.
2. Open up the Control Prompt.
3. Run the post-obit:

                Motion C:WindowsSystem32Utilman2.exe C:WindowsSystem32Utilman.exe              

Restart your server once more and you're done.

How to Recover Windows Server Password With Password Recovery Disk

If you have created a password recovery disk for your server, insert the USB stick into the server and then reboot the system.

1. When prompted to log in, click the Reset Password link.
2. In the Forgotten Password wizard, click Next until y'all are prompted for the location of the password disk.
3. Select the password reset disk and so follow the instructions to set a new password.
4. Reboot your estimator and log in with the new countersign.

Decision

This how-to article covered three singled-out employ cases:

1. Changing an admin countersign yous know. If you already know your ambassador password, changing information technology is equally unproblematic as navigating to the Users surface area on your server and selecting to modify the admin password.
2. Resetting an admin password you don't know. If yous don't call up your administrator password, yous tin can use the Command Prompt window to reset it. Resetting works for both Windows Server 2008 R2 and Windows Server 2012.
3. Using a Password Recovery Disk. If y'all don't think your ambassador countersign, but you previously created a password recovery disk, yous can use that disk to reset a forgotten password.

Whatever your use instance may be, by following this guide, you will be able to reset a Windows Server admin countersign.

Was this article helpful?

Yes No

Dejan Tucakov

Dejan is the Head of Content at phoenixNAP with over vii years of experience in Spider web publishing and technical writing. Prior to joining PNAP, he was Chief Editor of several websites striving to advocate for emerging technologies. He is dedicated to simplifying complex notions and providing meaningful insight into data center and cloud engineering science.

How To Change Service Account Password In Windows Server 2012,

Source: https://phoenixnap.com/kb/how-to-change-admin-password-windows-server-2008-r2-2012

Posted by: watsoncautity.blogspot.com

Share this post